Types and Uses of Plug Gauges

 Plug gauges are available in several different types. These include:

Go plug gauges

No-go plug gauges

Combination go/no-go plug gauges

Go plug gauges and no-go plug gauges are called single-ended gauges and consist of a handle into which a precisely machined pin or shaft has been inserted (sometimes called a member) and which is used to verify an aspect of the dimensional tolerances of the hole. For single-ended gauges, they are usually offered in pairs with one go gauge and one no-gauge gauge.

In its use, a go plug gauge is designed to test the minimum dimensional limit of the hole (i.e. the lower tolerance of the hole’s diameter) which represents the maximum amount of remaining material on the part or workpiece. For an acceptance condition, the go plug gauge should fit in the hole. If the go plug gauge will not fit into the hole in the workpiece, then that is an indication that the hole’s diameter is too small (an insufficient amount of material has been removed from the workpiece) and the part needs to be rejected.



For a no-go plug gauge, its purpose is to validate the maximum dimensional limit of the hole (the upper tolerance of the hole’s diameter) which corresponds to the minimum acceptable amount of material remaining on the part or workpiece. For the part to be accepted, the no-go plug gauge should not fit into the hole. If the no-go plug gauge did not fit into the hole, then this is an indication that the hole’s diameter Is below the upper limit and the part can be accepted (provided that the go plug gauge did fit into the hole). If however, the no-go plug gauge fits into the hole, then that is an indication that the hole’s diameter is too large (i.e. beyond the upper tolerance limit that was specified), meaning that too much material was removed during the machining operation, and therefore the part must be rejected. Table 1 below summarizes these conditions and the resulting accept/reject status of the part.

In a combination go/no-go plug gauge (also called a double-ended plug gauge), the gauge handle has a go plug gauge extending outwards from one side of the handle and a no-go plug gauge extending outwards from the opposite side. This simplifies the use of the tool and allows for increased speed in the inspection process. In some models, the handle may be color-coded with the go side painted with green paint and the no-side painted with red paint. Even without color-coding, for plug gauges, the go plug gauge can always be distinguished from the no-go plug gauge by two observable conditions:

The go plug gauge is always smaller in diameter than the no-go plug gauge, and

The go plug gauge is always larger in width (thickness) than the no-go plug gauge

Plug gauges provide fast results and have the advantage that users can be easily trained on their use as plug gauges rely on a simple working principle. As a result, no strong knowledge of scientific methods and metrology is needed, making training simpler and open to a wider pool of users. Their simplicity also means that they are inexpensive relative to other forms of measuring instruments.

One drawback of plug gauges is that through use they tend to wear out over time and therefore require replacement. They should also be checked periodically to assure that they are still within tolerance.

Plug gauges that are used for the accept/reject screening of parts are called working gauges.

评论

发表评论

此博客中的热门博文

How Do Power Lines Work?

图片
  Electricity is delivered to homes, schools, hospitals, businesses and industries through an integrated system of power plants, power lines and substations. Transmission lines consist of heavy-duty cables wound between tall towers that carry electricity from where it is generated to where it is needed. Transmission networks allow for the transmission of large amounts of electricity over long distances.   Power systems involve the generation, transmission and distribution of electricity. As the demand for electricity grew and small power plants that could only serve local areas became inadequate, the need for high-capacity transmission arose. Newer, larger power plants come online, but far from load centers. Transmission lines were the only way to get power to where it was needed.   Most long-distance power lines do not use insulation around the conductors themselves. Insulation in this way must be so thick that it is not cost effective. Instead, most of the insulation comes from the a
阅读全文

What are the main functions of HPMC in a dry mix mortar?

图片
    The roles of  HPMC  for  dry mix mortar In dry mix mortar, Adding a little HPMC can significantly improve the performance of wet mortar. It can be seen that HPMC is a major additive that affects the construction performance of mortar. 1. Water retention Water retention is an important property of HPMC. The viscosity, dosage, environmental temperature and molecular structure of HPMC have a greater impact on its water retention performance. Under the same conditions, the higher the viscosity of HPMC, the better the water retention; The higher content, the better the water retention. Generally, a small amount of HPMC can greatly increase the water retention rate of the mortar. When the content reaches a certain level, The trend of the water retention increasing slows down; as the ambient temperature increases, the water retention of  HPMC  usually decreases, but some modified HPMC also have better water retention under high temperature conditions; HPMC with lower substitution degree h
阅读全文

Metal Grating: Everything You Need to Know

图片
What is Metal Grating? The word “grating” may apply to a number of metal items, in metal industries. Each form has its own collection of distinct characteristics that make it more or less suitable for the specific use. Street drains, for example, will usually use a type of bar grating, while walkways are generally used in a safer type of extended grating or grip strut. Metal grating, regardless of the actual use, provides for adequate drainage, ventilation, and protective precautions in a number of industries. Different types of  Metal Grating Metal Grating are widely different in both materials and purpose. Various types of metals and various types of production are used to make sure that the operating systems are safe, based on its applications. Also it depend on various parameters like strength and size, its location and usage. Expanded Metal Gratings Expanded Metal Gratings are metal gratings which are made through split in a metal sheets, and then the sheets are expanded, into a d
阅读全文